Federation Mortise & Tenon Gates
Can I Customise The Design Of These Gates?
Yes – as all federation mortise & tenon gates are made to order you can customise certain elements.
What Sizes Are Available?
All federation mortise & tenon gates are made to order based on your measurements.
Curved Top Mortise & Tenon Gate
Use the below options to help you in designing your curved top mortise & tenon gate
Product Details
- LOSP treated pine
- Frame size 88×66
- Bevel on inside frame (can be left without)
- 20mm overhang on bottom of frame (can be made flush)
- Bottom panel made from 85×18 tongue and groove vee joint boards
Size
- Maximum width of 1500mm
- Maximum height of 1800mm
- Height of centre beam can be adjusted – standard height is approx. 350mm from top rail
Post Top Style
- Choose between plain, bevelled, angled, rounded or round with cutout
Top Panel Design
Choose from the following options:
- 42×18 plain slats only
- 42×18 plain slats with decorative frieze slat in centre
- 85×18 tongue and groove vee joint boards
- All decorative frieze slats
- Other slat sizes may be used upon request
Straight Top Mortise & Tenon Gate
Use the below options to help you in designing your straight top mortise & tenon gate
Product Details
- LOSP treated pine
- Frame size 88×66
- Bevel on inside frame (can be left without)
- 20mm overhang on bottom of frame (can be made flush)
- Bottom panel made from 85×18 tongue and groove vee joint boards
Size
- Maximum width of 1500mm
- Maximum height of 1800mm
- Height of centre beam can be adjusted – standard height is approx. 350mm from top rail
Post Top Style
- Choose between plain, bevelled, angled, rounded or round with cutout
Top Panel Design
Choose from the following options:
- 42×18 plain slats only
- 42×18 plain slats with decorative frieze slat in centre
- 85×18 tongue and groove vee joint boards
- All decorative frieze slats
- Other slat sizes may be used upon request
Reverse Curved Top Mortise & Tenon Gate
Use the below options to help you in designing your reverse curved top mortise & tenon gate
Product Details
- LOSP treated pine
- Frame size 88×66
- Bevel on inside frame (can be left without)
- 20mm overhang on bottom of frame (can be made flush)
- Bottom panel made from 85×18 tongue and groove vee joint boards
Size
- Maximum width of 1500mm
- Maximum height of 1800mm
- Height of centre beam can be adjusted – standard height is approx. 350mm from top rail
Post Top Style
- Choose between plain, bevelled, angled, rounded or round with cutout
Top Panel Design
Choose from the following options:
- 42×18 plain slats only
- 42×18 plain slats with decorative frieze slat in centre
- 85×18 tongue and groove vee joint boards
- All decorative frieze slats
- Other slat sizes may be used upon request
Related Products
