Awning Kits
How Wide Are The Awning Kits?
Small and medium kits can span from 1.2m to 3.6m wide but can be cut down smaller during installation.
Large kits can span from 2.1m to 3.6m wide.
We do not recommend a large kit for anything smaller than 2.1m wide.
How Do I Choose Between Small, Medium Or Large Kits?
Firstly, measure how wide the existing window is from outside edge to outside edge then allow an additional 100mm either side for fixing of the wall plates.
This will determine which kit width is required.
Next, measure how much space you have from the top of the existing window to the roof or any other fixtures.
If you have a lot of space available medium or large would be best suited.
If there is not much space available a small would be best suited.
Do I Need To Purchase Roofing With The Kits?
We supply kits with or without weathertex shingle roofing.
Small Awning Kit
Product Details
- 30 degree pitch
- LOSP treated pine
- Total height = 1020mm
- Total depth = 650mm
- Supplied as components only
Kit Inclusions
- Small assembled ends with 65×42 wall plates and F33a brackets x 2
- Cut and notched rafters 65×42
- 65×42 LOSP treated pine – cut to width
- 42×30 LOSP treated pine frieze
- Can be supplied with or without weathertex roofing
Widths Available
- 1200mm
- 1500mm
- 1800mm
- 2100mm
- 2400mm
- 2700mm
- 3000mm
- 3300mm
- 3600mm
Medium Awning Kit
Product Details
- 45 degree pitch
- LOSP treated pine
- Total height = 1345mm
- Total depth = 650mm
- Supplied as components only
Kit Inclusions
- Medium assembled ends with 65×42 wall plates and F33a brackets x 2
- Cut and notched rafters 65×42
- 65×42 LOSP treated pine – cut to width
- 42×30 LOSP treated pine frieze
- Choice of decorative frieze slat x 2
- Can be supplied with or without weathertex roofing
Widths Available
- 1200mm
- 1500mm
- 1800mm
- 2100mm
- 2400mm
- 2700mm
- 3000mm
- 3300mm
- 3600mm
Large Awning Kit
Product Details
- 45 degree pitch
- LOSP treated pine
- Total height = 1515mm
- Total depth = 790mm
- Supplied as components only
Kit Inclusions
- Large assembled ends with 90×42 wall plates and F33 brackets x 2
- Cut and notched rafters 90×42
- 90×42 LOSP treated pine – cut to width
- 42×30 LOSP treated pine frieze x 2 @ 1.2m
- Choice of decorative frieze slat x 2
- Can be supplied with or without weathertex roofing
Widths Available
- 2100mm
- 2400mm
- 2700mm
- 3000mm
- 3300mm
- 3600mm
Related Products
